Ran test cycle with towels found bracket holding washer and dryer together squeaking during spin adjusted bracket tested good

Installed new rollers and ran to test. Unit is operating as it should. All ok.

Installed new drum assembly and verified smooth operation. Drum gap is better but now a roller is thumping. It has a flat spot on it from running out of round. Unit needs front rollers. ; ordrng 2 Unknown (Roller)s

Customer states that the dryer is leaving pull/stretch marks on thinner items. Not seeing it happen on towels or heavier items. Items are not stuck under anything when the customer finds them this way. Ran unit to test for noises. No abnormal noises. No loose vents or rollers. Drum is slightly out of round. No split seams. The drum being slightly out of round is letting it pull in thinner/light items. The unit will need the drum assembly. ; ordrng 1 137610700 (Drum) and 2 5304499489 (Seal)s and 1 5308027429 (Hi temp glue) and 2 137610610 (Vane straight)s and 1 137610510 (Vane mixing)

Installed new fan thermistor and control board and reset unit and checks ok