Leveled unit a tested all components. Lowered washer as low as possible to prevent excessive vibration when spinning. Unit is located on a crawl space and will cause extra movement in the floor. Calibrated washer.

Unit has a defective timer and motor. Order parts.; ordrng 1 W10857612 (Timer) and 1 279827 (Motor)

"Removed and replaced defective suspension rods. Ran machine in diagnostics, tested every function of the washing machine several times all functions tested good. Customer needs to be mindful of the capacity of the unit and not overload it and cause a out of balance issue"

"Rebuilt bottom side of washing machine. Replaced gearcase, actuator, motor, drive block, and splutch. Calibrated and ran a test cycle. ; used 1 W10721967 (SPLUTCH) from stock"

Washer is overfilling due to a faulty pressure sensor or the auto sensing . No leaks found ordering replacement control board. ; ordrng 1 W11603811 (Control board)