Installed evaporator assembly in ice room and cycled unit; used 1 A19676501 (Drier) from stock

Found bad inverter board to the compressor, customer going to think about repair

Inspected the unit and found a partial frost pattern in the icebox section. Temps reading 33 degrees. Fan running and Icemaker responding. Temps in fresh food section at 35 and freezer temps at -6 degrees. Order icebox evap. ; ordrng 1 Xxxxx (Icebox evaporator)

Checked unit found that the unit was giving a 4E code for a pressure switch/not filling with water error. Checked hot and cold water. Both units were filling properly. Cleared out pressure switch reprogrammed control and tested. Unit seems to be functioning now. Instructed customer to run cleaning tablets through the unit.

Inspected the unit and found the coins in the drain pump and an error code for oversudes and stuck keypad. Cleared the drain pump and flushed the tub of suds. Cleared error codes and found all buttons on the keypad functioning. All checks ok.