Checked unit over found the unit had one bad roller on the front left. Replaced roller. Found at the drum was out of balance due to being overloaded. Vents were plugged up. I did inform the customer that the drum would not be covered because it is not a manufacturer defect and it is not caused by normal wear and tear. Informed customer that I needed to have their vents cleaned. Checks OK ; used 1 DE702T (DRUM ROLLER) from stock

Checked unit over found that the unit has a shorted motor and burnt belt. Needs new motor and belt. No repair per Rhonda

"Replaced switches checks ok ; used 2 WB24X10047 (DOOR SWITCH), and 2 WB24X829 (MICRO SWITCH) from stock"

Unit was over filling with water. Found drain pump wasnt pumping causing unit to over fill and flood. Removed unit out of hole and removed bottom and replaced drain pump. Checks ok; used 1 00631200 (DRAIN PUMP) from stock

Checked unit over found the clamp for the dispenser had rusted and broken causing the unit to leak. Replaced clamp and tested unit. Checks OK