"Installed new water valve, control board and pressure switch. Tested unit and all checks are good at this time"

Installed all parts and reassembled unit. Checked all burners everything seems to be functioning properly.

Removed and replaced defective front panel.

"Inspected and ran diagnostic mode on the washer. Washer threw an E 41 error code, which is related to the door switch. Ran through several test cycles could not re-create the sound that was reported. Disconnected power to the unit reset the board informed customer that removing power from the unit will recalibrate the unit and let the settings default back to factory settings. this should help the unit to run better in the future however, if this problem happens again, please contact your warranty company and I will order a control board and a water inlet valve to try to remedy the issues with the filling of the water that you were explaining to me about at this time, I cannot re-create that problem at this time."

Inspected the range. Found the controls for the cooktop unresponsive at times. Ordering controllers and control board. ; ordrng 1 5304536435 (Controller) and 1 5304536437 (Controller) and 1 5304535108 (Control board) and 1 5304536436 (Controller) and 1 5304536437 (Controller)