Are you thinking about getting an Amana washer, but you’re not sure if they’re reliable? Maybe you’ve already got one, and you’re wondering what to expect as it gets older. This guide will walk you through the five most common problems that are likely to occur with an Amana washer and how they can be fixed. Let’s get started!
This guide refers to all popular models of Amana washers, including:
ALW880QAW
CW2303/P7762131W
CW3303L/P1128412W
CW3303W/P1128405W
CW8202W2/PCW8202W2
DLW330RAW
LTA85AW/PLTA85AW
LTC85AW/PLTC85AW
LW1503/P1110513R
LW2603/P7804714W
LW8203W2
LWA50AW
NAV2330AWW
NAV5800AWW
NFW7200TW10
NFW7200TW11
NFW7300WW00
NTW4500VQ1
NTW4501XQ0
NTW4630YQ0
NTW4650YQ0
No one wants a washing machine leak. Pooling water can damage your flooring and lead to expensive repairs, so it’s essential to keep on top of any leak issues. Leaks can happen with all washers, but there are a few ways to prevent them and fix them if they occur.
A leak will most likely occur at one of the joining points of the hoses. When you’re setting up your Amana washer, ensure that the hoses are all properly connected and that the seals are perfectly intact. When it comes to the drainage hose, make sure it’s well seated into the drain pipe so that no water can escape.
This only applies to front loading machines, but make sure that you keep the door seal clean and free from grime and detergent buildup. A dirty seal is far less effective, and can lead to leaks.
Wipe your seal regularly with a soft cloth, and if you do notice a leak, make sure the seal is in good condition. If it’s torn or damaged, you can order a replacement seal online.
A buildup of lint, dirt particles and loose items like coins and buttons can block your drain hose, which can lead to water spilling out onto the floor. To make sure this doesn’t happen, clear your washing machine’s lint trap regularly to make it less likely that unwanted items will end up in the drainage hose. If your hose is blocked, try removing it from the machine and clearing out the blockage with a long brush or some wire.
This can happen with any washing machine—you go to start it, but nothing happens! This is typically due to a power issue and can be very frustrating—particularly if you have a lot of laundry to do! Here’s how to fix the issue:
Another common issue with washers is drainage issues. Perhaps your clothes are coming out of the machine wetter than they should be, or perhaps your tub isn’t draining at all. There are a few main causes of this issue:
A few things can cause a noisy spin cycle in an Amana washer. Here are the main causes:
The agitation cycle is what cleans your laundry—it moves the clothes around in the drum and helps to loosen grime and oils. There are a few reasons why your Amana washer might not be agitating, including:
Disposing your refrigerator isn't as simple as throwing out the trash. There are dangerous chemicals…
Have you noticed water pooling on the kitchen floor around your freezer? Perhaps you’ve also…
There are several possible reasons why the ice maker in a Whirlpool refrigerator might stop…
It can be frustrating when your LG refrigerator stops making ice as it should. There…
Kenmore refrigerators are renowned for their reliability and durability, but some users do occasionally encounter…
Dealing with unpleasant odors in your refrigerator is always stressful, and fish smells might be…
Leave a Comment