If your washer faucet is leaking it will need to be repaired or replaced. Luckily, this is an easy task to do and only involves buying a new one, removing the defective one, and then installing the new faucet.
The first thing you need to do is to go out and buy or order the correct replacement washer faucet. The simplest way to do this is to take the old one off and then take it to a hardware store to ensure you get the correct replacement part. You may also need to purchase a new washer to prevent leaks from occurring.
Once you have a replacement washer faucet, simply follow the step-by-step instructions in this guide and you’ll have your new one attached in no time.
The first step is to locate and then turn off the shutoff valve that supplies water to the faucet you’re replacing. The shutoff valve can usually be found underneath the sink. If you’re replacing a hot water faucet there may be a shutoff valve on the water tank you can turn off. If you cannot find a shutoff valve, you’ll need to turn the water supply off completely.
If you are living in an apartment building or set of connected flats you may need to consult the building manager to arrange for the water to be turned off. Before moving on to the next step, double-check that the water supply has been turned off.
Once the water supply has been shut off, the next step is to remove the faucet handle. This is required so you can access the locking nut that secures the stem in position.
Here’s how to remove the handle:
Once the faucet handle is removed, you can then take the faucet stem off. Here’s how to remove it:
At the bottom of the stem that you just removed there will be a washer. If the washer is damaged or just worn out it should be replaced. To determine if it is faulty, you first need to remove the brass screw that holds it in place. Once the washer has been removed, check to see if it’s damaged. If so, purchase a new washer to replace it with. The new washer can then be installed into the stem and secured in place with the screw that you removed earlier. If the screw is corroded or bent out of shape it will also need to be replaced.
Now that you’ve replaced the washer in the faucet or have a brand-new faucet to install, the final step is to reattach the faucet components so you can start using your taps again.
Here’s what to do:
There are several possible reasons why the ice maker in a Whirlpool refrigerator might stop…
It can be frustrating when your LG refrigerator stops making ice as it should. There…
Kenmore refrigerators are renowned for their reliability and durability, but some users do occasionally encounter…
Dealing with unpleasant odors in your refrigerator is always stressful, and fish smells might be…
It’s always stressful when you have an issue with your dishwasher—after all, no one likes…
If your Whirlpool dishwasher isn’t draining, your first instinct might be to contact an appliance…
Leave a Comment