A SUD error code on your Samsung washer means that the washer is detecting too many soap suds in the washer drum or, as Samsung describes it, an “over-sudsing condition.” Samsung washers have a foaming control function, which tries to reduce suds when detected but will show a SUD error if it fails to reduce them. The SUD code is displayed while the washer stops the cycle so that the suds can dissipate. The cause of the issue is usually the use of too much detergent or the type of detergent used.
When doing a washing load, make sure to follow the detergent manufacturer’s instructions for the correct amount of detergent to use. If the SUD error code persists, a small reduction of the recommended amount of detergent may resolve the issue. Attention should also be paid to the concentration of the detergent, with the amount adjusted accordingly. Also, be aware that high-efficiency washers require less detergent than standard machines.
Samsung recommends using a high-efficiency (HE) detergent, which has low sudsing properties and is designed for high-efficiency washers. High-efficiency detergents are designed for modern washers that require less water. Detergents not designed for high-efficiency washers are more likely to cause the over-sudsing issue. A high-efficiency detergent is usually easy to spot, as it will have “HE” printed on the label. In addition to less suds, high-efficiency detergents should do a better job of removing stains and cleaning your clothes.
When your Samsung washer gives you the SUD error code, leaving the washing machine to resolve the issue will usually resolve it. Once the washer detects the issue is resolved, it should automatically continue with the cycle.
If you are using the correct amount of detergent and the detergent is an HE detergent, you may need to clear out detergent residue in the washer to fix the problem. To clear out detergent residue, run a long wash cycle, set to a high temperature, without any clothes in the washer. After the cycle, check that the washer is free of detergent residue. Clean away any detergent residue that remains.
Many Samsung washers that display the SUD error code will have a drain pump filter that can be accessed, removed, and cleaned. The SUD error can be caused by the buildup of suds and debris in the drain pump filter and cabinet.
To clean the drain pump filter:
If you have followed all of the advice above, the foam level sensor may be defective and falsely detecting suds in the tub. While instructions for testing and replacing the sensor are provided below, you should consider contacting a trained professional to check and replace the filter.
To check and replace the foam level sensor:
Instead of a SUD error code, some Samsung washers may display a 5D or SD error code. The 5D or SD error code is the same as the SUD error code. The washer has detected too many soap suds; it should pause automatically and wait for the suds to dissipate. Making sure you are using a high-efficiency detergent, not using too much detergent, removing detergent residue from the washer, and cleaning the drain pump filter should resolve the issue.
There are several possible reasons why the ice maker in a Whirlpool refrigerator might stop…
It can be frustrating when your LG refrigerator stops making ice as it should. There…
Kenmore refrigerators are renowned for their reliability and durability, but some users do occasionally encounter…
Dealing with unpleasant odors in your refrigerator is always stressful, and fish smells might be…
It’s always stressful when you have an issue with your dishwasher—after all, no one likes…
If your Whirlpool dishwasher isn’t draining, your first instinct might be to contact an appliance…
Leave a Comment